Adaptive Motion EB100-multi stack CNC Centreline Boost Bending Machine
A Heavy Duty mandrel boost bending CNC tube bending machine
Capable of bending tube sizes up to: 100mm/od x 3.5mm/wt
The perfect machine and software for
1D and bend on bend compound bending
Electric servo powered Y-Axis carriage boost system
Electric servo driven bend head
Servo hydraulic direct acting pressure die
Hydraulic drop away clamp die
Servo hydraulic pressure die assist
Automatic lubrication system.
This EB100 as spent its entire time bending mild steel exhaust pipes for the Toyota Tundra. Apart from a little chipped paint around the bend head and a few cable ties yet to be fitted the machine as been fully overhauled providing complete peace of mind, and is in ‘As New Condition’ and available immediately.
Complete with the very latest Phenix CNC Controller and Software
To be fitted and installed on-site your works by: Craig Webster
Craig designed and built the machine and is the software architect for Adaptive Motion now based here in the UK. He, and his team will also be able to provide: Installation, Commissioning, Service, On-going Support and Operator training a complete package.
Phenix is a 21st century Open Source and Expandable, Efficient and Economical Intuitive System that unlocks the power of digital. To minimise setup time and scrap material. The Direct-Acting Clamp, Pressure Die and Pressure-Die-Assist (Follower) are fully closed-loop CNC axes and feature no mechanical screw-adjusters, hydraulic flow controls or manual hydraulic pressure adjusters. These features are normally associated with more expensive ‘All Electric’ bending machines.
Following a tooling changeover, the Clamp and Pressure-Die “Learn” their respective “closed” positions and will decelerate to these positions to help minimise wear and tear.
Furthermore, these actuators are fully coordinated, the advancing Y-axis carriage is synchronised with the opening of the Clamp to help minimise cycle-time. Also, the Pressure-Die and Clamp do not have to wait for completion of Y & B axis motion prior to closing.
The Pressure-Die-Assist (Follower) is synchronised with the C-axis bending arm, based on the bending die’s CLR. However, during the bending cycle, the actual velocity and force, exerted by the PDA, can be user profiled. This feature provides total control of this critical tube-forming component. Essential when bending, thin gauge tube to tight centreline radiuses.
The C-axis features a 40HP closed-loop AC Vector-Drive motor, directly coupled to a NORD helical-bevel gear-reducer. The Y-axis carriage positioning and Push-Assist features a 40HP closed-loop AC Vector-Drive, directly coupled to a Nord gear-reducer too.
To summaries:
* Low-cost investment
* Includes: UK installation, commissioning, and operator training
* Complete with on-going service, support and back-up.
Got questions – Book a live or remote demonstration – or need assistance?
Please feel free to let us know. We’re a friendly bunch (after coffee) and here to:
Help you get it right – It’s what we do! – Quotation available up on request
Your local contact is:
John Owen
Fluent in CNC tube bending
Direct dial: +44(0)7776 213919